4/2/2023 0 Comments Airvpn interfaceDisable the default WAN access firewall rules on the Firewall > Rules > LAN page:.Set Address Family to IPv6 and set Advanced > Gateway to WG_IVPN_GWV6, then click Save and Apply Changes. If your LAN includes IPv6, create another firewall rule following step #1 above.Click Extra Options > Display Advanced and scroll down to Gateway and set it to the WG_IVPN gateway WG_IVPN_GWV4.Navigate to Firewall > Rules > LAN, click the Add (top) button and set the following:.This will ensure that traffic does not leak if the VPN tunnel accidentally goes down. Delete the other rule(s) containing your local network subnet that exist via WAN, (keep the 127.0.0.0).Change Interface to WG_IVPN and change Description to mention the VPN, like LAN to IVPN.Look for the entry that contains your local network subnet (the one that does not contain port “500” or IP address “127.0.0.0” entries, this might be 192.168.1.0/24) and click on the Pen icon (Edit mapping).Navigate to Firewall > NAT > Outbound and change the mode to Manual.Navigate to Interfaces > LAN and set MSS to 1412.Click the Save button and click the Apply Changes button.Set Gateway IPv6 to same fd00:4956:504e:ffff::wxyz:wxyz IP address that was assigned in the Account Area (or use the “simplified” IPv6 address).Change the Gateway name to WG_IVPN_GWV6. ![]() Beside IPv6 Upstream Gateway, click the + Add a new gateway button.In the Set IPv6 Configuration section, set the IPv6 Address to the same fd00:4956:504e:ffff::wxyz:wxyz IP address that was assigned in the Account Area (or use the “simplified” IPv6 address). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |